← Back to Field Notes21 min read ✳

Mountain Horse Sovereign Boots Review: Features and Fit

A pair of black leather Mountain Horse Sovereign boots with a lace-up front.

The Mountain Horse Sovereign is a full-grain leather field boot built for a comfortable heels-down position, with Mountain Horse's Prolaze-Flexnotch ankle, a removable ShockX insole, a full-length YKK zipper and a Spanish-cut top. It comes in several heights and calf widths, so careful measuring matters more than anything else. We don't carry Mountain Horse.

Every rider knows the dread of breaking in new tall boots: stiff ankles, rubbing and the awkward first week. The Mountain Horse Sovereign Boots are often shortlisted by riders who want a classic field boot that is designed for comfort. We haven't tested the Sovereign ourselves, so this review sticks to what Mountain Horse publishes about the boot and to fitting guidance from boot makers. It covers the features, how the sizing works, how to measure, what to expect from break-in, how to care for tall boots, and the tall boots we do carry if you'd like to compare.

Key Takeaways

  • Built around comfort features: Mountain Horse pairs full-grain leather with a flexible Prolaze-Flexnotch ankle, a removable ShockX Advanced insole and a tempered steel shank, all aimed at a comfortable heels-down position in the saddle and stability on the ground.
  • Measure carefully: The Sovereign is offered in several height and calf-width combinations. That makes a close fit possible for many riders, but only if you measure your calf height and width accurately and read Mountain Horse's chart.
  • Care makes tall boots last: Wiping boots down after each ride, conditioning the leather regularly and storing them upright with boot trees keeps leather supple and the shape intact.

What Are Mountain Horse Sovereign Boots?

The Sovereign is a tall field boot from Mountain Horse. Field boots are the tall boots with laces at the front of the ankle. They are a traditional choice for hunters, jumpers and equitation riders, and many riders also school in them every day. Mountain Horse describes the Sovereign as "traditional and timeless" and says it offers a more comfortable heels-down position.

The boot's appeal is that it combines a classic look, with a high Spanish-cut top and lacing at the ankle, with features aimed at comfort, such as a cushioned removable insole and a flexible ankle design. That makes it a boot riders consider both for the show ring and for long schooling days.

Because we don't stock it, we can't tell you how a specific pair fits or how it wears over a season. What we can do is explain what each feature is for, how to measure for it, and what to look for in any tall boot. That information applies whichever boot you choose.

Where the information comes from

The feature details below are Mountain Horse's own product description, as published with the boot by its authorized US retailers. Mountain Horse may update a model or offer different versions in different countries, so check the current product page and size chart for the exact boot and color you're buying.

What Goes Into a Pair of Sovereign Boots?

Mountain Horse lists a full set of construction details for the Sovereign. Here is what each one is and why it matters for a rider.

Full-grain leather inside and out

Mountain Horse describes a premium full-grain leather outer and a smooth full-grain leather lining. Full-grain leather keeps the natural surface of the hide, which is why it is a classic choice for tall boots. A leather lining is smooth against your breeches and socks.

Leather tall boots soften and shape to your leg with wear. That is good for comfort, but it also means a boot that starts out too loose will only get looser. We cover what that means for sizing in the fit section below.

Prolaze-Flexnotch ankle

The feature Mountain Horse highlights most is its Prolaze-Flexnotch technology, which it says gives a more comfortable heels-down position. The idea is simple: a stiff tall boot can fight your ankle when you sink your weight into your heel, and a design that flexes at the front of the ankle makes that position easier to hold.

Field boots already have laces at the ankle for this reason. Mountain Horse adds nine sets of eyelets with fixed elastic lacing, so the laces give with your ankle without you having to tie and retie them.

ShockX Advanced insole

Inside the boot, Mountain Horse fits a removable, ergonomically designed ShockX Advanced insole. A cushioned insole helps on long days on your feet at a show or the barn. Because it is removable, you can take it out to let the boot air or to check the fit of your foot.

High-Density outsole and steel shank

Underfoot, Mountain Horse describes its Exceptional High-Density outsole with grip-responsive ripple zones for traction, and an integrated tempered steel shank for stability while riding and walking. A shank is a stiffening piece in the sole under the arch. It helps the boot hold its shape over the stirrup tread and gives support when you're walking around the barn.

YKK Vislon zipper, snap keeper and hidden elastic

The Sovereign has a strong, full-length YKK Vislon zipper in the back, with a snap zipper keeper at the top. Mountain Horse adds durable, hidden elastic along the side of the zipper for a comfortable, contoured fit. Elastic beside the zip gives the calf a little room to move as you ride, while the zip makes a close-fitting boot possible to get on and off.

Protective heel cover and spur rest

At the base of the zipper, a protective heel cover with a snap safeguards the zipper. Mountain Horse also lists a spur rest, a small ledge at the heel that helps keep a spur in place.

Spanish-cut top

The Sovereign has a high Spanish-cut top with a sewn-down swagger tab. A Spanish top rises higher on the outside of the leg than the inside. It is a traditional detail on tall boots and gives a longer line to the leg in the saddle.

Boot trees and bag included

Mountain Horse says its inflatable boot trees and a boot bag come in the box. Boot trees help a tall boot keep its upright shape between rides, and a bag keeps dust off in storage and protects the boots when you travel to shows.

Color options

The Sovereign is listed in black and brown. Black is the traditional choice for many show rings, and brown is popular for schooling, clinics and some hunter and equitation looks. Check the rules for your discipline and the prize list of any show before you choose.

Sovereign Features at a Glance

Feature What Mountain Horse lists
Outer and lining Full-grain leather outer, smooth full-grain leather lining
Ankle Prolaze-Flexnotch technology; nine sets of eyelets with fixed elastic lacing
Insole Removable ShockX Advanced insole
Outsole and shank High-Density outsole with grip-responsive ripple zones; tempered steel shank
Closure Full-length YKK Vislon rear zipper, snap keeper, hidden elastic beside the zip
Details Spanish-cut top, swagger tab, spur rest, protective heel cover with snap
Included Inflatable boot trees and boot bag
Colors Black, brown

Field Boots vs. Dress Boots

The Sovereign is a field boot, and it helps to know how that differs from a dress boot before you buy.

A dress boot has a plain front with no laces and a stiffer leg. It is a common choice for dressage and for some formal classes. A field boot has laces across the front of the ankle, which lets the ankle bend more easily. That suits a shorter stirrup and a forward seat over fences, which is why field boots are the usual choice for hunters, jumpers and equitation.

Fit differs a little too. Ovation's tall boot fitting guide says a field boot should come up to the center of your kneecap when new, while a dressage boot should sit slightly below the kneecap. If you ride mainly dressage, a dress boot may suit you better than any field boot. Our English riding boots guide explains the styles in more detail.

How Do Mountain Horse Sovereign Boots Fit?

A tall boot only works if it fits your leg. One that is too loose sags at the ankle as it breaks in. One that is too tight is painful and hard to get on. The Sovereign's range of heights and widths makes a close fit possible for many riders, but it also means you need to be precise.

Heights and calf widths

Mountain Horse's US size chart, as published with the boot, lists the Sovereign in whole sizes from 6 to 11, with fit styles including Regular, Regular Short, Regular Tall, Slim, Slim Tall and Wide. Not every fit style comes in every foot size, and what is in stock varies by color and retailer. The chart gives a calf-width range and a boot height for each combination, so you can match both of your measurements rather than just your shoe size.

Because availability changes, always work from Mountain Horse's current chart for the exact boot you're buying. If your measurements fall between two fits, the chart and the maker's or retailer's fitting help are the best way to decide.

Why your shoe size isn't enough

Two riders with the same shoe size can need very different tall boots. Calf height, from the floor to the back of the knee, and calf width, at the widest part of the calf, vary a lot from person to person. A boot with the right foot and the wrong height or calf will never be comfortable. That's why tall boot charts, including the Sovereign's, list several heights and widths for each foot size.

How to Measure for Tall Boots

Measure carefully before you order any tall boot. It takes a few minutes and saves a lot of frustration.

What you need

  • A soft, flexible tape measure.
  • The breeches or tights and socks you normally ride in. Both Shires and Ovation say to wear your riding legwear and socks when you measure.
  • A chair, so you can sit with your knees bent.
  • A friend to read the tape, if possible.

Step by step

  1. Sit down. Shires' fitting guide says to sit on a chair with your feet flat on the ground and your legs at a 90-degree angle.
  2. Measure calf height. Measure from the floor to the back of your knee. Ovation describes calf height the same way.
  3. Measure calf width. Wrap the tape around the widest part of your calf, keeping your feet flat and your legs at 90 degrees.
  4. Measure both legs. Legs are often slightly different. Use the larger measurement.
  5. Check your foot size. Use the boot maker's own size guide for your foot. Ovation suggests thinking about the thickness of the socks you ride in when you choose a whole size.
  6. Compare with the chart. Match your height and calf width to the closest combination on the chart for the exact boot you want.

How snug should the calf be?

Ovation's guide says tall boots should fit tightly around the calf, but not so tight that they affect blood flow. It adds that if your calf is more than 1/8 inch larger than the boot's listed calf, you should try the next size up. Ovation also notes that field and dress boots usually hug the calf, and that the leather loosens somewhat with wear.

Fitting the foot

The foot of a tall boot matters as much as the leg. Ovation's guide suggests checking that the ball of your foot sits well on the stirrup pad. If you went up a foot size to get a taller boot, Ovation suggests a padded insert, such as an air cushion or gel sole, to fill the extra space. The Sovereign's removable ShockX insole makes it easy to see how much room your foot has.

Your toes shouldn't press against the end of the boot, and your heel shouldn't slide freely when you walk. If it does, the foot may be too big.

Trying Tall Boots On at Home

When a new pair arrives, try them on carefully before you ride in them, so you can still exchange them if the size is wrong.

  1. Dress for riding. Put on the breeches or tights and socks you normally ride in, the same ones you measured in.
  2. Unzip fully. Slide your foot in with the zip all the way open, then zip up slowly. A zip should close without you having to pull the leather together by force.
  3. Check the calf. The boot should feel snug around the widest part of your calf, without pinching or cutting off circulation, as Ovation describes.
  4. Check the height. Sit down with your knees bent. A new field boot should come up high, around the center of your kneecap, and may bend at the top. That is expected and will ease as the ankle softens.
  5. Check the ankle. Stand with your heels lowered, as you would in the stirrup. The front of the ankle should flex, not dig into your shin.
  6. Walk around indoors. Wear them for a short time on a clean floor. Keep the soles clean so the boots stay in new condition until you're sure of the size.

Common Tall Boot Fit Problems

Most tall boot problems come back to height and calf width. Knowing what each one looks like helps you catch it early.

The zip won't close

If the zip strains or won't close with your calf relaxed, the calf is too narrow for you. Ovation's guide says that if your calf is more than 1/8 inch larger than the boot's listed calf, try the next size up. Leather softens with wear, but a boot that won't close at all won't stretch enough to fix that safely.

The calf is loose

A loose calf may feel comfortable on day one, but Ovation warns that loose boots sag too much, become too low, and can crease deeply around the ankle, which rubs. If you can slide a hand easily between the boot and your calf, try a slimmer width.

The boot feels too tall

Some extra height is normal in a new tall boot, as covered above. A boot that presses painfully into the back of your knee even while you're standing, though, may be a height too tall. Compare your calf height measurement with the chart again before you decide.

The boot feels the right height already

This is the one that catches riders out. A boot that feels perfect in height when new can end up too short once the ankle settles. If you're unsure, choose the taller option that still fits your calf.

What to Expect During Break-In

Leather tall boots need some breaking in. The Sovereign's flexible ankle and elastic lacing are designed to make the heels-down position more comfortable, but any new leather boot will feel firmer at first than it will after a few weeks.

Boots start tall

New tall boots usually feel too tall. Ovation's guide says boots are often too tall at first and will bend slightly at the top when you bend your knee. That is expected. As the leather softens around the ankle, the boot settles lower on your leg. Buying a boot that already feels the right height on day one can leave you with a boot that ends up too short.

Loose boots sag

Ovation warns that loose boots sag too much and become too low, and that a boot that stretches unevenly can form deep creases around the ankle that rub and irritate the skin. That's why a snug calf and the right height matter more than how a boot feels the first time you pull it on. Ovation also says to expect tall boots to be hard to pull on and off at first.

Break them in gradually

Shires' fitting guide suggests wearing new boots for a short time around the house, then gradually building up how long you wear them. Shires says your boots are broken in once they have a close but comfortable feel and any pressure points are gone. Avoid wearing brand-new boots for a full show day or a long clinic until they've had a few shorter sessions.

Signs of a fit problem

Some stiffness is normal at first. Pain that doesn't ease, a zipper that strains even when the calf is relaxed, or a boot that drops so far it rubs behind the knee are signs that the size isn't right. If you see those signs, contact the retailer you bought from early, while the boots are still in new condition.

How to Care for Tall Leather Boots

Tall leather boots last much longer with a simple routine. A few minutes after each ride protects the leather, the zipper and the shape of the boot.

Clean after every ride

Shires recommends using a soft, damp cloth after each ride to remove sand, dirt and mud. Arena footing and sweat dry the leather out, and grit in the zipper teeth is hard on any zip. Brush dirt out of the zipper and the elastic lacing, and wipe the heel cover clean.

Condition regularly

Shires suggests cleaning and conditioning boots at least once a month with leather boot care products. Use a product made for smooth boot leather, follow its label, and let the boots dry naturally away from direct heat such as a heater or fireplace.

Store them upright

Store tall boots upright in a cool, dry place out of direct sunlight. Boot trees help a tall boot keep its shape and stop the ankle from creasing when you're not wearing it. Mountain Horse includes inflatable boot trees with the Sovereign. A boot bag keeps the leather clean in storage and when you travel. If you need one for another pair, the Professional's Choice English Tall Boot Bag is one option.

Look after the zipper

A tall boot zipper works hard. Unzip fully before you pull the boot on or off, rather than forcing your foot past a half-open zip. Keep the teeth free of dirt, and close the snap keeper at the top and the heel cover snap at the bottom so they protect the zip as intended.

What the Product Description Can't Tell You

A maker's description tells you what a boot is made of and what each feature is for. It can't tell you how a particular pair will fit your leg or how it will wear after a season of daily riding, and we haven't ridden in the Sovereign ourselves. A few things are worth checking for yourself before and after you buy.

  • Your measurements against the chart. Fit depends more on choosing the right height and calf width than on any single feature.
  • The maker's warranty and the retailer's terms. Ask the retailer you buy from what applies if a zipper or seam fails, and keep your receipt.
  • How the boot suits your riding. A field boot designed for a heels-down position over fences may not be the best choice if you ride mostly dressage or spend most of your time on wet trails.
  • Care. Any leather boot, however well made, lasts longer when it's cleaned after each ride, conditioned regularly and stored upright.

Getting Tall Boots On and Off

Back-zip boots like the Sovereign are far easier to get on than the pull-on tall boots riders once wrestled with, but a few habits help the zip last. Sit down to put boots on, so you aren't balancing on one leg and pulling on the zip. Open the zip all the way, set your heel down into the boot, then close the zip in one smooth movement while your calf is relaxed. Fasten the snap keeper at the top so the zip can't creep down while you ride, and close the heel cover snap at the bottom.

To take them off, unzip fully before you pull your foot out. Wipe the boots down while the dirt is fresh, then put the boot trees in so the ankles don't fold over as the leather dries.

Tall Boots We Carry

We don't carry Mountain Horse, so we can't offer the Sovereign. If you'd like to compare, the tall boots we carry come from Shires' Moretta line. Each is described below from Shires' own product pages. You can see all of them, along with paddock boots and half chaps, in our Riding Boots collection.

Shires Moretta Gianna

Shires describes the Shires Moretta Gianna Leather Tall Riding Boots as leather field riding boots that get a close leg fit by pairing hard-wearing leather inner calves with softer outer panels that hug the leg. Shires lists dressage-cut tops with soft piqued leather inners, a stretch mock lace detail, rear YKK zips, ActiveFlex insoles with its Impact Support System, Moretta shock-absorbing rubber soles with steel shanks, and WickAway linings. Shires offers the Gianna in several heights and in calf widths from Extra Slim to Extra Wide.

Shires Moretta Ortona

The Shires Moretta Ortona Tall Black Leather Riding Boots are a dressage-cut boot. Shires describes milled cow leather polished to a high sheen, a YKK zip system with a leather zip security tab and zip guards, leather-covered UltraFit panels that shape the calf, a WickAway lining, an ActiveFlex insole, a Moretta shock-absorbing rubber outsole, steel shanks and a leather-covered spur rest. Shires offers it in short, standard and tall heights and calf widths from Extra Slim to Extra Wide.

Shires Moretta Lanciano

For an everyday tall boot, Shires describes the Shires Moretta Lanciano Leather Tall Riding Boots as smooth leather with a streamlined zip fastening, a shaped leg and a contoured ankle, suitable for both training and competition. Shires lists calf widths from Extra Slim to Extra Wide.

Shires Moretta Voltana Long XGRIP

If you ride outside in wet weather, the Shires Moretta Voltana Long XGrip Tall Leather Riding Boots are built for it. Shires describes outer buffalo leather treated for water protection, a waterproof membrane inside, a WickAway lining and a Moretta XGRIP outsole. Shires' composition notes say the membrane runs to the ankle and the upper calf is not waterproof, so treat them as protection for wet ground rather than standing water up the leg.

A paddock boot and half chap option

Not every rider needs tall boots. Paddock boots with half chaps give lower-leg support for lessons and schooling, and many riders use them every day and save tall boots for shows. The Shires Moretta Clio Plus Paddock Boots pair with half chaps such as the Shires Moretta Suede Half Chaps. Measure your calf for half chaps the same way you would for tall boots.

How they compare

Boot Style Features the maker lists
Mountain Horse Sovereign Field boot Full-grain leather, Prolaze-Flexnotch, ShockX insole, steel shank
Shires Moretta Gianna Field boot, dressage-cut top Leather with stretch panels, mock lace, ActiveFlex insole, steel shanks
Shires Moretta Ortona Dress boot Milled cow leather, UltraFit panels, leather-covered spur rest
Shires Moretta Lanciano Tall boot Smooth leather, zip, shaped leg, contoured ankle
Shires Moretta Voltana Long XGRIP Tall country and riding boot Water-treated buffalo leather, waterproof membrane to the ankle

For more side-by-side detail on these boots and how to choose between them, see our guide to women's tall leather riding boots.

Are Mountain Horse Sovereign Boots Right for You?

On paper, the Sovereign has a lot to offer: full-grain leather inside and out, a flexible ankle aimed at a comfortable heels-down position, a removable cushioned insole, a sturdy zipper with protection at both ends, and boot trees and a bag in the box. If you ride hunters, jumpers or equitation, or you want a classic field boot for schooling and shows, it's a reasonable boot to shortlist.

The deciding factor, as with any tall boot, is fit. The Sovereign's range of heights and calf widths is only an advantage if you measure carefully and choose the right combination. Take your measurements in your riding clothes, compare them with Mountain Horse's current chart, and expect a new boot to feel tall and firm at first.

If you ride mostly dressage, a dress boot such as the Ortona may suit you better. If you ride outdoors in wet weather, a water-treated boot like the Voltana is worth comparing. And if you want one pair for everything, think about how much of your riding is schooling and how much is showing before you decide.

Questions to ask before you buy

  • Do I need a field boot, a dress boot, or paddock boots with half chaps?
  • Have I measured both calves for height and width in my riding breeches and socks?
  • Does my measurement fit one of the maker's height and width combinations, or am I between sizes?
  • Will I ride mostly in the arena, or outside in wet conditions?
  • Do the boots meet the dress rules for the shows I plan to enter?

Frequently Asked Questions

How long does it take to break in Sovereign boots?

It depends on the rider, the fit and how often you ride, so there's no fixed number of rides. Mountain Horse designs the Sovereign's Prolaze-Flexnotch ankle and elastic lacing for a more comfortable heels-down position, which helps. Shires' general advice for any tall boot is to wear new boots for short periods at first and build up gradually, and to count them as broken in once they feel close but comfortable with no pressure points.

Are Sovereign boots suitable for both showing and everyday riding?

Mountain Horse describes the Sovereign as a traditional field boot with a high Spanish-cut top, which suits hunter, jumper and equitation turnout, and it adds comfort features such as a removable cushioned insole and a steel shank for walking. Check your show's dress rules for color and style, and keep everyday boots clean and conditioned so they stay presentable.

I'm between sizes on the chart. What's the best way to choose?

Measure again carefully, in your riding breeches and socks, sitting with your knees at 90 degrees, and use the larger leg. Ovation's fitting guide says that if your calf is more than 1/8 inch larger than a boot's listed calf, try the next size up. For the Sovereign, use Mountain Horse's current chart and ask the retailer you're buying from for help with your numbers.

How tall should tall boots feel when I first try them on?

Tall. Ovation's guide says new boots are often too tall at first and bend slightly at the top when you bend your knee, and that a field boot should reach the center of your kneecap when new. As the leather softens around the ankle, the boot settles lower. A boot that feels the perfect height on day one may end up too short.

About the Author

Elyse Allahar

A cornerstone of the Hooves and Paws family for over a decade, Elyse is a trusted expert for the global equestrian community. With more than 10 years of dedicated experience, she has a deep understanding of equestrian gear and supplies. Elyse specializes in helping riders from all over the world find the precise equipment they need to succeed, whether they are just starting out or competing internationally. Her commitment to service and extensive product knowledge make her an invaluable resource for all our customers.

Equip Your Horse with Trusted, Quality Gear

Explore our curated collection of rope halters, tack essentials, and durable gear designed to keep your horse comfortable, safe, and ready to perform.

Shop Now

Leave a comment

Please note, comments need to be approved before they are published.

READ MORE

Blog posts

Dressage Saddle Pad: Shape, Drop, and Fit

A dressage saddle pad is cut for a long, straight flap and a lifted spine, not for a jumping flap...

Are Laser Toys Bad for Cats? Safety Explained

Are laser toys bad for cats? Not necessarily. A laser pointer can prompt a cat to move and chase, but...

Cat and Kitten Toys: Choosing Safe Play Options

Choosing cat and kitten toys starts with observing what your animal enjoys, then matching options to age, size, and habits....